Where can I find information on dryer venting codes?

Dryer venting
« previous next »
Pages: [1]

Author Topic: Where can I find information on dryer venting codes?  (Read 24209 times)

admin

  • Administrator
  • Full Member
  • *****
  • Posts: 158
  • Gender: Male
    • View Profile
    • http://www.dryerbox.com
admin
Where can I find information on dryer venting codes?
« on: July 29, 2009, 01:59:45 PM »
2003 IMC - International Mechanical Code (section 504) 

Building codes vary from region to region (with amendments) and not all of the jurisdictions follow the ICC or adopt ICC codes at the same time.  In most cases they all basically include the same restrictions.  Some codes have been found to be less restrictive.  Many of them concur that the exception to the 35 foot minimum run length is when the appliance manufacturer's installation instructions specify maximum lengths with particular models.   In this case, the make, model and installation instructions need to be provided to the building inspector and sometimes a permanently mounted sign or placard is placed behind the dryer identifying the overall length of the exhaust duct and the respective model that the house was approved with.  A summary of the typical codes relating the dryer venting is as follows:


  • Dryer vent systems shall be independent of all other systems and shall convey the moisture to the outdoors. 
  • Terminations shall be a minimum of three feet from property line and 12" above the ground and not exhibit any type of screen.
  • Vents and duct connections shall be connected mechanically (with sheet-metal screws or rivets) and shall not protrude more than 1/8" into vent.
  • Exhaust vents shall be equipped with a back draft damper and no screen.
  • Vents shall be constructed of minimum 0.016-inch-thick (0.406 mm) rigid metal ducts, having smooth interior surfaces with joints running in the direction of air flow and having a minimum interior diameter of 4".
  • Flexible duct shall not be concealed within the construction.
  • The maximum length of a 4-inch (102 mm) diameter exhaust vent shall not exceed 35 feet (7620 mm) from the dryer location to wall or roof termination, and shall terminate with a full opening exhaust hood.  A reduction in maximum length of 2.5 feet for each 45-degree bend and 5 feet for each 90-degree bend shall apply.  Installations where this length is exceeded shall be installed in accordance with the manufacturer's installation instructions.
    New for 2018 codes will be that the passageway through the termination hood cannot diminish in size and must maintain a minimum of 12.5 sq inches.  Also, the 4" round ductwork cannot be deformed, it must retain its round profile. 
    « Last Edit: November 10, 2017, 01:43:02 PM by rickharp »
    Report to moderator   Logged
    In-O-Vate Technologies, Inc
    Jupiter, FL  33477
    561-743-8696

    Rashisport

    • Newbie
    • *
    • Posts: 1
      • View Profile
    Rashisport
    Re: Where can I find information on dryer venting codes?
    « Reply #1 on: November 10, 2017, 01:37:06 AM »
    This is so wonderful that I found it.
    Report to moderator   Logged

    admin

    • Administrator
    • Full Member
    • *****
    • Posts: 158
    • Gender: Male
      • View Profile
      • http://www.dryerbox.com
    admin
    Re: Where can I find information on dryer venting codes? updated
    « Reply #2 on: August 20, 2019, 11:53:33 AM »
    Here are links to the current 2018 International Code Council Building Codes that deal with Dryer Venting

    2018 International Residential Code for One and Two Family Dwellings  Section M1502 Clothes Dryer Exhaust


    2018 International Mechanical Code Section 504 Clothes Dryer Exhaust


    Also, some links that apply to the new code regarding the area of the passageway of any dryer termination hood. 

    https://dryerjack.com/icc-code-adoption-q3-2017-dryerjack

    https://dryerjack.com/code-change-alert   
    « Last Edit: August 20, 2019, 12:01:38 PM by rickharp »
    Report to moderator   Logged
    In-O-Vate Technologies, Inc
    Jupiter, FL  33477
    561-743-8696
    Pages: [1]
    « previous next »